Ana içeriğe geç
İngilizce
İspanyolca
Adım 2
Heat the glass screen with a blowdryer to soften the adhesives Start the next step on the opposite side of the Fitbit wording below the glass. This is due to the display cables being located there Insert a razor blade between the glass and the body
Display
  • Heat the glass screen with a blowdryer to soften the adhesives

  • Start the next step on the opposite side of the Fitbit wording below the glass. This is due to the display cables being located there

  • Insert a razor blade between the glass and the body

  • Keep going around the rim of the display until loose

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.