Ana içeriğe geç
Çince
İngilizce

Adım 1 çevriliyor

Adım 1
turn off the laptop and remove all the cable connect to your laptop. Place the back of the laptop up. Remove 6 M2.5X8 computer base screws on the baseplate.
  • turn off the laptop and remove all the cable connect to your laptop.

  • Place the back of the laptop up.

  • Remove 6 M2.5X8 computer base screws on the baseplate.

Turn off the laptop and remove all the cables connected to your laptop.

Place the back of the laptop up.

Remove the six 8mm screws from the back cover using a Phillips #0 screwdriver.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.