Eşyalarını Tamir Et Topluluk Mağaza

Lenovo Thinkpad Toetsenbord Reiniging

Önceki adım

Adım 5 çevriliyor

Kılavuza Dön
İngilizce
Flemenkçe
Adım 5
Lenovo Thinkpad Keyboard Cleaning, Replacing the Butterfly Mechanism and Key Cap: adım 0, 1 resimden 1.
Replacing the Butterfly Mechanism and Key Cap

  • To replace the butterfly mechanism, first, verify that you are holding it the right way round and the right way up.

  • Position the bottom pegs in their clips and then, holding it in position with a finger, press each of the top two pegs into their clips.

  • To replace the key cap, carefully place it accurately in position and first press the top corners in order to engage the top clips. Then press the bottom corners to engage the bottom clips.

  • Check that the key cap is level, all four clips engaged and that it moves freely up and down.

Het vlindermechanisme en de toets kap terug plaatsen

Om het vlindermechanisme te vervangen, controleer je eerst of je het op de juiste manier vasthoudt.

Plaats de onderste pinnen in hun clips en druk ze vervolgens met een vinger op hun plaats en druk elk van de bovenste twee pinnen in hun clips.

Om de toets kap terug te plaatsen, plaatst je deze voorzichtig nauwkeurig op zijn plaats en drukt u eerst op de bovenste hoeken om de bovenste clips vast te klikken. Druk vervolgens op de onderste hoeken om de onderste clips vast te zetten.

Controleer of het toets kapje recht zit (alle vier de clips vastgezet) en of het vrij op en neer kan bewegen.

-[title] Replacing the butterfly mechanism and key cap
-[* black] To replace the butterfly mechanism, first verify that you are holding it the right way round and the right way up.
-[* black] Locate the bottom pegs in their clips and then, holding it in position with a finger, press each of the top two pegs into their clips.
+[title] Replacing the Butterfly Mechanism and Key Cap
+[* black] To replace the butterfly mechanism, first, verify that you are holding it the right way round and the right way up.
+[* black] Position the bottom pegs in their clips and then, holding it in position with a finger, press each of the top two pegs into their clips.
[* black] To replace the key cap, carefully place it accurately in position and first press the top corners in order to engage the top clips. Then press the bottom corners to engage the bottom clips.
-[* black] Check that the key cap is level (all four clips engaged) and that it moves freely up and down.
+[* black] Check that the key cap is level, all four clips engaged and that it moves freely up and down.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.