Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Flemenkçe
Adım 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Trek de zuignap met een stevige, constante kracht omhoog om zo een kleine opening te creëren tussen het voorste schermpaneel en de achterste behuizing.

Steek een openingsplectrum in de zojuist door jou gecreëerde opening.

De waterdichte kleefstrip die het scherm vasthoudt, is erg sterk: het creëren van de opening kan daarom heel wat kracht kosten. Als je moeite hebt met het creëren van de opening, zul je meer warmte moeten gebruiken om het scherm daarna heen en weer en op en neer te wiebelen, zodat er genoeg ruimte ontstaat voor het inbrengen van je plectrum.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.