Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

用恒定的拉力向上拉动吸盘,以在前面板和后壳体之间形成一个很小的间隙。

在间隙中插入一个三角撬片。

将显示屏固定在位的防水粘合剂非常牢固;产生此初始间隙需要大量的力。如果你在打开缝隙时遇到困难,请施加更多的热量,然后轻轻上下摇动屏幕以减弱粘合剂,直到产生足够的缝隙以插入工具。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.