Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 9
If you haven't removed your suction handle or iSclack, remove it now. Open the iPhone by swinging the display up from the right side, like the front cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.
Open the iPhone
  • If you haven't removed your suction handle or iSclack, remove it now.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

吸盤ハンドルもしくはiSclackを外していない場合、ここで外してください。

iPhoneのディスプレイを左側から右側に向けて(本のページをめくるように)開きます。

まだディスプレイを完全に開かないでください。iPhoneのロジックボードに接続されたデリケートなリボンケーブル数本が装着されたままです。

ディスプレイの背中に何かボックスを衝立てて、作業をしやすくします。

再組み立ての際にはディスプレイを定位置に置き、上端でクリップを揃えてゆっくりと所定の位置に押し込み、ディスプレイを取り付けます。 クリップが固定されたカチッという音がしない場合は、ディスプレイ周辺のクリップの状態を確認し、曲がっていないか確認してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.