Ana içeriğe geç

Sostituzione gruppo schermo iPhone 12 Pro

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
İtalyanca

Adım 15 çevriliyor

Adım 15
iPhone 12 Pro Display Assembly Replacement, Open the iPhone: adım 0, 3 resimden 1. iPhone 12 Pro Display Assembly Replacement, Open the iPhone: adım 0, 3 resimden 2. iPhone 12 Pro Display Assembly Replacement, Open the iPhone: adım 0, 3 resimden 3.
Open the iPhone
  • Rotate your iPhone so the right edge faces you.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Ruota il tuo iPhone così che il bordo destro sia rivolto verso di te.

Apri l'iPhone sollevando lo schermo dal lato destro, come per sollevare la copertina di un libro.

Non cercare di staccare del tutto il display, perché questo è ancora connesso alla scheda logica dell'iPhone da diversi fragili cavi piatti.

Appoggia lo schermo contro qualche tipo di supporto per mantenerlo aperto mentre lavori sul telefono.

Durante il rimontaggio disponi il display in posizione, allinea le clip lungo il bordo superiore e premi delicatamente il bordo stesso per metterlo in posizione prima di reinserire tutto il display. Se non si incastra facilmente fino al clic, controlla le clip lungo il perimetro del display per assicurarti che non si siano deformate.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.