Ana içeriğe geç
İngilizce
Flemenkçe
Adım 3
Take a look at your hard disk. From the lid, you should be able to make out the outline of where the disk is.
Take aim!
  • Take a look at your hard disk. From the lid, you should be able to make out the outline of where the disk is.

  • If in doubt, on the botton of the disk you should be able to see the motor, which directly drives the disk spindle.

  • Below the disk is the read/write head actuator spindle.

  • Note a point roughly half to three quarters of the way from the centre of the disk and its circumference. This is where you will be doing the damage!

  • For laptop drives the hammer and nail method (Step 5) is probably quickest. But for the very few having aluminium platters and for desktop drives having a tougher cover the drill method (Step 6) is generally easier.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.