Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de l'écran de l'iPhone 12 Pro Max

İngilizce
Fransızca

Kılavuz Ön Koşulları

Bu çevirinin tamamlanmış sayılması için önce, tüm ön koşul kılavuzlarının çevrilmesi gerekir.

Remplacement des vis Pentalobe de l'iPhone 12 Pro Max

Repère de profondeur sur un médiator (prérequis)

Remplacement de l'ensemble écran de l'iPhone 12 Pro Max

Remplacement du module haut-parleur interne et capteurs frontaux de l'iPhone 12 Pro Max

Kılavuz Bilgisi

= Bitti = Eksik
    If your iPhone 12 Pro Max screen is cracked, not responding to touch, or not showing a picture when your phone is powered on, use this guide to restore your iPhone to working order with a new screen, a.k.a. display assembly. This guide only covers steps for replacing a full display assembly that comes with a shield plate preinstalled.
    ***The combined earpiece speaker + sensor assembly affixed to the back of the display is paired to your individual iPhone from the factory***, so you must transfer it from your old display to your new one during any display replacement. It contains the flood illuminator, which is part of the biometric Face ID security feature. If it is damaged or replaced, Face ID will cease to function, so take extra care not to damage any of these components during this procedure. If damaged, only Apple or an Apple-authorized technician can restore Face ID function.
    ***Note***: On iOS 17.6 and earlier, True Tone functionality is disabled after a screen replacement, even when using an original Apple screen. On iOS 18 and newer, you can calibrate your new screen using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true] to restore True Tone functionality on genuine screens purchased from Apple.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro%20Max|iPhone 12 Pro Max Answers community] for troubleshooting help.

      Kılavuz Adımları

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.