Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
Almanca
Adım 2
Slide an opening pick underneath the home button cable to separate it from the front panel. Gently slide it forward to cut through the adhesive securing the home button cable to the front panel. The cable is secured with some light adhesive.
  • Slide an opening pick underneath the home button cable to separate it from the front panel.

  • Gently slide it forward to cut through the adhesive securing the home button cable to the front panel.

  • The cable is secured with some light adhesive.

  • If the adhesive is stubborn, don't force the pick. Lightly heat the home button cable using an iOpener or a hair dryer to soften the adhesive.

  • Continue sliding the opening pick until you reach the home button bracket.

Schiebe ein Plektrum unter das Kabel zum Home Button und trenne es vom Frontpanel ab

Schiebe das Plektrum behutsam vorwärts, um so das Kabel vom Frontpanel abzuschneiden.

Das Kabel ist leicht festgeklebt.

Wenn das Kabel etwas hartnäckig festklebt, dann schiebe trotzdem das Plektrum nicht mit Gewalt vorwärts. Erwärme das Kabel mit einem iOpener oder einem Haartrockner, damit der Kleber weich wird.

Schiebe das Plektrum so weit voran, bis du an der Halterung des Home Buttons angekommen bist.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.