Ana içeriğe geç

MacBook Pro 13" vier Thunderbolt-poorten 2020 Vervanging van het trackpad

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım 8 çevriliyor

İngilizce
Flemenkçe
Adım 8
MacBook Pro 13" Four Thunderbolt Ports 2020 Trackpad Replacement: adım 0, 3 resimden 1. MacBook Pro 13" Four Thunderbolt Ports 2020 Trackpad Replacement: adım 0, 3 resimden 2. MacBook Pro 13" Four Thunderbolt Ports 2020 Trackpad Replacement: adım 0, 3 resimden 3.
  • Remove the trackpad assembly.

  • Be sure not to lose the six small washers (two circular and four rectangular) resting on the underside of the trackpad.

  • Make sure your new trackpad has a ribbon cable installed before reassembly. If necessary, transfer the old cable, or install the one your new trackpad came with.

Verwijder de trackpadmodule.

Zorg dat je de zes kleine ringen (twee ronde en vier rechthoekige) die zich aan de onderkant van het trackpad bevinden niet verliest.

[* black] Remove the trackpad assembly.
[* red] Be sure not to lose the six small washers (two circular and four rectangular) resting on the underside of the trackpad.
+[* icon_reminder] Make sure your new trackpad has a ribbon cable installed before reassembly. If necessary, transfer the old cable, or install the one your new trackpad came with.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.