Eşyalarını Tamir Et Topluluk Mağaza

Technics SL-1900 Turntable Disassembly

Kılavuza Dön
İngilizce
Korece
Önceki adım

Adım 7 çevriliyor

Adım 7
Technics SL-1900 Turntable Disassembly, Replace Knobs During Reassembly: adım 0, 3 resimden 1. Technics SL-1900 Turntable Disassembly, Replace Knobs During Reassembly: adım 0, 3 resimden 2. Technics SL-1900 Turntable Disassembly, Replace Knobs During Reassembly: adım 0, 3 resimden 3.
Replace Knobs During Reassembly

  • When reassembling the unit, take special care to reseat the control knobs back onto their controls on the circuit board.

  • First, remove the small plastic cover holding the control knobs captive. From the bottom, release three plastic tabs indicated in red. Then slide the small plastic cover forward, to release the two plastic tabs indicated in yellow.

  • Reseat the control knobs back onto their metal posts.

  • Replace the small plastic cover by inserting the two tabs (yellow) and pushing down to reseat the three tabs (red).

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.