Eşyalarını Tamir Et Topluluk Mağaza

Desmontaje del mando de Oculus Quest 2

Kılavuza Dön
İngilizce
İspanyolca
Adım 7
Oculus Quest 2 Controller Disassembly, Remove Screws From Circuit Board And Disconnect Joystick: adım 0, 1 resimden 1.
Remove Screws From Circuit Board And Disconnect Joystick

  • Now, you need to remove the 4 screws holding the circuit board to the controller.

  • The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon.

  • You are NOT going to remove it completely, just lift it high enough to remove the joystick.

Retira los tornillos de la placa del circuito y desconecta el joystick.

Ahora, necesitas quitar los 4 tornillos que sujetan la placa del circuito del controlador.

El joystick tiene una pequeña cinta (cinta azul) también, pero es fácil de conectar y desconectar. Levanta el pestillo para desconectar la cinta del joystick.

NO vas a quitarla por completo, sólo levántala lo suficiente como para quitar el joystick.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.