Eşyalarını Tamir Et Topluluk Mağaza

Démontage d'une manette Oculus Quest 2

Kılavuza Dön
İngilizce
Fransızca
Adım 7
Oculus Quest 2 Controller Disassembly, Remove Screws From Circuit Board And Disconnect Joystick: adım 0, 1 resimden 1.
Remove Screws From Circuit Board And Disconnect Joystick

  • Now, you need to remove the 4 screws holding the circuit board to the controller.

  • The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon.

  • You are NOT going to remove it completely, just lift it high enough to remove the joystick.

Retirez les vis du circuit imprimé et déconnectez le joystick

Maintenant, retirez les quatre vis qui fixent le circuit imprimé sur la manette.

Le joystick a également une petite nappe (flèche bleue), mais elle est facile à connecter et déconnecter. Ouvrez le loquet pour déconnecter la nappe.

Ne la retirez pas complètement, soulevez-la juste assez pour retirer le joystick.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.