Oculus Quest 2 Controller Disassembly

İngilizce

Çince

Adım 7 çevriliyor

Adım 7

Remove Screws From Circuit Board And Disconnect Joystick

Now, you need to remove the 4 screws holding the circuit board to the controller.
The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon.
You are NOT going to remove it completely, just lift it high enough to remove the joystick.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.