Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Use a Torx T6 screwdriver to remove the two 7 mm screws from the triggers (one on each trigger).
-
Use a Torx T5 screwdriver to remove the two 5 mm screws securing the motherboard.
-
Gently lift the motherboard from the controller housing.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.