Üzerinde çalıştığınız device'ın spesifik parçasını veya bileşenini tarif edin. EÖrneğin: Pil
Bir başlık oluştur.
Okuyucuya, onlar daha kılavuza dalmadan önce gerekli olan arka plan bilgilerini aktarın.
Adım 1 — Remove the camera gimbal cover
Turn the rotor blades towards the battery compartment.
Adım 2 — Unfold the front rotor arms
Since the front rotor arms block the rear ones, it is absolutely necessary to unfold them first.
Adım 3 — Unfold rear rotor arms
Turn the drone onto its back.
Adım 4
Unfold the phone holder.
Adım 5 — Switch on remote control
Stecke dein Handy in die Halterung und verbinde es per Kabel mit der Fernbedienung.Put your phone in the cradle and connect it to the remote control via cable.
Adım 6 — Turn on drone
Before you turn on the drone, you should slide a fully charged battery into the battery compartment.
Adım 7 — Connect to the drone
With both devices turned on, open the "DJI Fly" app on your phone and wait for your drone to connect, you can tell because the app will show you a live image of your Drone.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.