Nintendo Switch OLED Model Screen OLED Assembly Replacement

Kılavuz Ön Koşulları

Bu çevirinin tamamlanmış sayılması için önce, tüm ön koşul kılavuzlarının çevrilmesi gerekir.

Nintendo Switch OLED Model Rear Case Replacement

Nintendo Switch OLED Model Shield Plate Replacement

Nintendo Switch OLED Model Game Card Reader Daughterboard Replacement

Nintendo Switch OLED Model Heat Sink Replacement

Nintendo Switch OLED Model Fan Replacement

Nintendo Switch OLED Model Motherboard Replacement

Nintendo Switch OLED Model Left Joy-Con Sensor Rail Replacement

Nintendo Switch OLED Model Bottom Rail Replacement

Kılavuz Bilgisi

= Bitti = Eksik

İngilizce

Çince

Hangi parçayı değiştiriyorsunuz?

Başlık

Giriş

Use this guide to replace the screen OLED assembly in your Nintendo Switch OLED.

The assembly includes the frame with the OLED panel and speakers attached to it. If you're replacing the OLED panel by itself, [guide|150112|follow this guide] instead.

***For your safety, discharge the battery below 25% before disassembling your Switch.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

The Switch OLED uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.

***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste when replacing the heat sink.

Sonuç