2. Assembly

İngilizce

Flemenkçe

Adım 3 çevriliyor

Adım 3

MGN12C Linear Rail Installation.

I noticed after I took the picture but the linear rail should be over left channel, NOT the right.
Using 2x 2040 jigs, 6x M3x6 socket head screws and 6x M3 T-nuts mount the linear rail to the Y 4040.
Using 2x 2020 jigs, 6x M3x6 socket head screws and 6x M3 T-nuts, mount the linear rail to the Z 2040 extrusions. The gap at the top should be 15mm.
Do this for both sides.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.