Eşyalarını Tamir Et Topluluk Mağaza

iPhone 14 Plus Vervanging van de naar voren gerichte cameramodule

İngilizce
Flemenkçe

Kılavuz Ön Koşulları

Bu çevirinin tamamlanmış sayılması için önce, tüm ön koşul kılavuzlarının çevrilmesi gerekir.

iPhone 14 Plus Vervanging van de Pentalobe-schroeven

Het markeren van de openingsplectrum (3 mm)

iPhone 14 Plus Vervanging van de glazen achterkant

Kılavuz Bilgisi

= Bitti = Eksik
    Use this guide to remove or replace the front-facing camera assembly in an iPhone 14 Plus.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.

    This assembly includes the front-facing camera and Face ID hardware. These parts come as one unit, and the sensors are [link|https://www.ifixit.com/News/66879/iphone-14-parts-pairing-results-apple-is-still-trying-to-monopolise-repair|uniquely paired to your logic board|new_window=true]. ***Note:*** If you replace this part, ***Face ID will no longer work***. This repair will restore a broken selfie cam to working order, but on iOS 17.6 and earlier, only Apple or an Apple “authorized” technician can restore Face ID. On iOS 18 and newer, you can recalibrate new, genuine front-facing cameras using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      Kılavuz Adımları

      Adım 1 — Schroef het plaatje van de voorste camera los

      Gebruik een Y000-schroevendraaier(bitje) om de twee 1.2 mm lange schroeven, waarmee het plaatje op de aansluiting van de voorste cameramodule bevestigd is, te verwijderen.

      Adım 2 — Verwijder het plaatje van de voorste cameramodule

      Gebruik een pincet of je vingers om het plaatje dat over de aansluiting van de voorste cameramodule is geplaatst te verwijderen.

      Adım 3 — Koppel de camera- en sensorkabels los

      Gebruik een spudger om de aansluitingen van de camera- en sensorkabels in een rechte beweging uit het contact omhoog te duwen en los te koppelen.

      Adım 4 — Verwijder de voorste cameramodule

      Gebruik een pincet of je vingers om de naar voren gerichte cameramodule te verwijderen.

      Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.