Calibración de DJI Mini 2 Gimbal

İngilizce

İspanyolca

Kılavuz Bilgisi

= Bitti = Eksik

Başlık

Giriş

Use this guide to calibrate your DJI Mini 2 camera gimbal. This will help you fix the gimbal calibration error after replacing the gimbal on your drone.

***''Download links''***

Python: [link|https://www.python.org/|https://www.python.org/]

PySerial: [link|https://pypi.org/project/pyserial/#files|https://pypi.org/project/pyserial/#files]

GitHub: [link|https://github.com/o-gs/dji-firmware-tools|https://github.com/o-gs/dji-firmware-too...]

7-zip: [link|https://7-zip.org/|https://7-zip.org/]

DJI Assistant: [link|https://www.dji.com/es/downloads/softwares/assistant-dji-2-for-mavic|https://www.dji.com/es/downloads/softwar...]

***''Script''***

Step 1: py comm_og_service_tool.py --port ***com pcode*** GimbalCalib JointCoarse

Step 2: py comm_og_service_tool.py --port ***com pcode*** GimbalCalib LinearHall

***''Additional Information''***

If your PC does not detect your drone and the drone is listed as a "bulk interface" or unknown device in the device manager, most likely your PC did not find drivers for your drone, in this case, download and install DJI Assistant 2.

*For DJI Mini 2 and Mini SE drone use product code from Mavic Mini.

[video|https://www.youtube.com/watch?v=mu03HWXplM4]

Sonuç

Başlık

Giriş

Usa esta guía para calibrar tu camara DJI Mini 2 gimbal. Esto ayudará a reparar el error de calibración gimbal después de reemplazarlo en tu drone.

***''Links de descarga''***

Python:
[link|https://www.python.org/%7Chttps://www.python.org/|new_window=true]

PySerail:
[link|https://pypi.org/project/pyserial/#files|https://pypi.org/project/pyserial/#files]

GitHub:[link|https://github.com/o-gs/dji-firmware-tools|https://github.com/o-gs/dji-firmware-too...]

7-zip:[link|https://7-zip.org/|https://7-zip.org/]

Asistente DJI: 
[link|https://www.dji.com/es/downloads/softwares/assistant-dji-2-for-mavic|https://www.dji.com/es/downloads/softwar...]

***''Guión''***

Paso 1: py comm_og_service_tool.py --port ***com pcode*** GimbalCalib JointCoarse

Paso 2: py comm_og_service_tool.py --port ***com pcode*** GimbalCalib LinearHall

***''Información adicional''***

Si tu computadora no detecta tu drone y el drone esta enlistado como "bulk interference" o dispositivo desconocido el el administrador de dispositivos, lo m'as común es que la computadora no haya encontrado los controladores para tu drone, en este caso, descarga e instala el Asistente DJI 2.

Sonuç

Kılavuz Adımları

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.