Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
-
Use a Phillips #1 screwdriver to remove the nine 3.2 mm screws from the motherboard.
-
Use a plastic spudger to lift the flaps covering the pins. Disconnect the pins from the motherboard.
-
Use a plastic spudger to disconnect the two wires connected to the CPU.
-
Use a plastic spudger to disconnect the pin on the bottom left of the motherboard.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.