Ana içeriğe geç

Sostituzione schermo iMac Intel 27" EMC 2546

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 44 kılavuzları etkileyecektir.

İngilizce
İtalyanca

Adım 23 çevriliyor

Adım 23
iMac Intel 27" EMC 2546 Display Replacement: adım 0, 3 resimden 1. iMac Intel 27" EMC 2546 Display Replacement: adım 0, 3 resimden 2. iMac Intel 27" EMC 2546 Display Replacement: adım 0, 3 resimden 3.
  • Be very careful handling the display—it's big, heavy, and made of glass. The display has fragile edges. Avoid lifting the display by the corners.

  • Lift the display up from the frame and remove it from the iMac. Lay the display face down on a flat, soft surface.

  • It may be necessary to slowly lift from one side, to peel against the remaining adhesive.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide when your repair is complete to replace the adhesive strips that secure the display to the rear enclosure.

Fai attenzione a maneggiare il display - è grande, pesante e fatto di vetro. Il display ha i bordi fragili. Evita di sollevarlo dagli angoli.

Solleva il display dalla scocca e rimuovilo dall'iMac. Appoggia il display faccia in giù su una superficie piana e morbida.

Potrebbe essere necessario sollevare lentamente lo schermo da una parte per staccare l'adesivo rimanente.

Dopo che l'adesivo è stato tagliato, non può essere riutilizzato per riattaccare il display. segui questa guida quando la tua riparazione sarà completa per sostituire le strisce adesive e assicurare il display alla scocca.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.