Ana içeriğe geç

iMac Intel 27インチ EMC 2546 ロジックボードアセンブリの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 16 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 5
iMac Intel 27" EMC 2546 Logic Board Assembly Replacement: adım 0, 3 resimden 1. iMac Intel 27" EMC 2546 Logic Board Assembly Replacement: adım 0, 3 resimden 2. iMac Intel 27" EMC 2546 Logic Board Assembly Replacement: adım 0, 3 resimden 3.
  • The hard drive SATA cable can't be removed just yet, but will get in the way of removing the logic board.

  • Pull the cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port.

ハードディスクのSATAケーブルはまだ取り外せませんが、ロジックボードを取り外す際に邪魔になるでしょう。

右側のハードドライブブラケットからケーブルとコネクタを引っ張ります。ケーブルをデバイス本体の右側、排気ポートの邪魔にならない位置へ寄せます。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.