Eşyalarını Tamir Et Topluluk Mağaza

Commercial 8 Quart Bowl-Lift Stand Mixer - Powertrain/Motor Replacement

Kılavuza Dön
İngilizce
Fransızca
Adım 6
Commercial 8 Quart Bowl-Lift Stand Mixer - Powertrain/Motor Replacement, Remove the motor support brackets: adım 0, 3 resimden 1. Commercial 8 Quart Bowl-Lift Stand Mixer - Powertrain/Motor Replacement, Remove the motor support brackets: adım 0, 3 resimden 2. Commercial 8 Quart Bowl-Lift Stand Mixer - Powertrain/Motor Replacement, Remove the motor support brackets: adım 0, 3 resimden 3.
Remove the motor support brackets

  • There are two motor support brackets: one in front, one back (shown in the first image)

  • Each bracket is attached to the motor by two screws (one on each side).

  • Using a #2 Phillips screwdriver, remove the four screws (circled in yblue in the second and third images) which attach the two motor support brackets.

  • Take care to place your hand under the support bracket when removing the second screw as they will fall out and could damage the finish.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.