Ana içeriğe geç

iPhone 14 屏幕替换前提指南

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 4
iPhone 14 Screen prereq: adım 0, 3 resimden 1. iPhone 14 Screen prereq: adım 0, 3 resimden 2. iPhone 14 Screen prereq: adım 0, 3 resimden 3.
  • Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps.

  • Use a hair dryer to heat along the bottom edge of the iPhone. The screen should feel slightly too hot to touch.

  • For complete instructions on how to use a hair dryer, check out this guide.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

将iPhon放在在坚硬的物品上,比如硬皮书,这样你就可以解放你的双手并且使手机与桌面平行--这样做会使下面的步骤变得简单。

使用吹风机沿着 iPhone 的底部边缘加热。 手机玻璃应该比较热而手无法触摸。

有关如何使用吹风机的完整说明,请查看本指南。

等待一分钟,让胶水软化,手机出现一个开口。

当反向钳创造出足够大的间隙时,在后玻璃下方插入三角撬片。

如果反向钳没有创造出足够的间隙,请对该区域施加更多热量并将手柄旋转四分之一圈。

一次不要转动超过四分之一圈,并且在转动之间等待一分钟。 让反向钳和时间为你工作。

跳过下两个步骤

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.