Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 8 çevriliyor
Adım 8
Rear top cover and heat sink
-
Remove two screws on each side of the top rear cover and remove the cover starting to pry from the bottom
-
Remove 4 screws in the floor of the battery compartment.
-
Remove the heat sink. In fact it may just fall off as it will only be held by the stickiness of the heat-conducting mastic.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.