Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 16 çevriliyor
Adım 16
Arm disassembly
-
Both the front and rear arms have covers on the bottom secured by two screws. Remove these screws.
-
In the case of the front arm there is a small board next to the motor with 3 connectors. One receives LED power from the motor control board, a second connects to a LED within the arm itself, and the third is a U.FL antenna connector. Disconnct all three if you need to transfer the board to a replacement arm.
-
The front arms are similar except that a somewhat larger board extends into the leg.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.