Üzerinde çalıştığınız device'ın spesifik parçasını veya bileşenini tarif edin. EÖrneğin: Pil
Bir başlık oluştur.
Okuyucuya, onlar daha kılavuza dalmadan önce gerekli olan arka plan bilgilerini aktarın.
Adım 1 — Dismantle the lever for the capsule insertion.
Attention: Disconnect the power cord of the device from the outlet!!
Adım 2 — Remove the screws for the back side
Remove the water tank and the attachments (drip pans, etc.)
Adım 3 — Remove the screws in the bottom
Turn the machine over
Adım 4 — Remove the lid
Run a spudger around the lid to loosen the clips.
Adım 5 — Remove back cover
Pull out the back cover upwards
Adım 6 — Remove the side panel
remove the 2 screws with a Phillips screwdriver
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.