Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.
Adım 16 çevriliyor
Adım 16
Separate the top edge adhesive
-
Insert a fifth opening pick in the top right corner of the screen.
-
Slide your pick toward the front camera. Stop when your pick is 3 cm (1.25 in) from the front camera.
-
Pull your pick out to a depth of 3 mm (1/8 inch) and slide it past the front camera.
-
When your pick is 3 cm past the front camera, insert it up to 6 mm deep, or about halfway between the tip and the iFixit logo, and slide it to the first pick you left in the top left corner.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.