Ana içeriğe geç

Reemplazo de la carcasa inferior del MacBook Air 15" 2023

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 27 kılavuzları etkileyecektir.

İngilizce
İspanyolca

Adım 6 çevriliyor

Adım 6
MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: adım 0, 3 resimden 1. MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: adım 0, 3 resimden 2. MacBook Air 15" 2023 Lower Case Replacement, Remove the lower case: adım 0, 3 resimden 3.
Remove the lower case
  • Remove the lower case.

  • During reassembly:

  • Set the lower case in place and align the sliding tabs with the screw heads they slide over. Press down and slide the lower case toward the back edge to engage the tabs—it'll stop sliding as the tabs engage.

  • When one side is engaged, it may push the other out of alignment. Check both sides as you push, there should be no gap along the back edge.

  • Once the lower case is flush with the frame, press down firmly along the perimeter to engage the six snapping clips.

  • You'll hear and feel a distinct click as each clip snaps into place.

Quitar la carcasa inferior

Durante el reensamblaje:

Coloque la carcasa inferior en su lugar y alinee las lengüetas deslizantes con las cabezas de los tornillos sobre las que se deslizan. Presione hacia abajo y deslice la carcasa inferior hacia el borde posterior para enganchar las pestañas; dejará de deslizarse cuando las pestañas encajen.

Cuando un lado está enganchado, puede empujar al otro fuera de la alineación. Verifique ambos lados a medida que empuja, no debe haber ningún espacio a lo largo del borde posterior.

Una vez que la carcasa inferior esté al ras con el marco, presione firmemente a lo largo del perímetro para enganchar los seis clips de presión.

Escuchará y sentirá un clic distinto cuando cada clip encaje en su lugar.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.