Ana içeriğe geç

Het schoonmaken van de poorten van je elektronische apparaat

İngilizce
Flemenkçe
Adım 4
How to Clean the Ports on your Electronic Device, Clean the port with isopropyl alcohol: adım 0, 3 resimden 1. How to Clean the Ports on your Electronic Device, Clean the port with isopropyl alcohol: adım 0, 3 resimden 2. How to Clean the Ports on your Electronic Device, Clean the port with isopropyl alcohol: adım 0, 3 resimden 3.
Clean the port with isopropyl alcohol
  • Follow this guide to make a custom cotton swab.

  • You can also use dental picks with barbed tips (non-flavored).

  • You can use a normal cotton swab, but most are too thick and have loose cotton that can snag on sharp edges.

  • Apply a few drops of highly-concentrated isopropyl alcohol (>90%) to the cotton.

  • Insert your tool between the middle contact pad and the perimeter of the USB-C port itself.

  • Don't force the tool into the port, as you risk breaking the middle contact pad.

  • Slide the tool along the perimeter of the port to clean it.

  • Wait a few minutes for the isopropyl alcohol to evaporate before plugging in your device and testing it.

Volg deze handleiding om een op maat gemaakt wattenstaafje te maken.

Je kunt ook niet-gearomatiseerde tandenstokers met getande uiteinden gebruiken.

Je kunt ook een normaal wattenstaafje gebruiken, maar de meeste zijn te dik en bevatten losse watten die aan scherpe randen kunnen blijven haken.

Breng een paar druppels hoog geconcentreerde isopropylalcohol (>90%) aan op het katoen.

Steek dit dan tussen het middelste contactvlak en een rand van de USB-C-poort.

Forceer het wattenstaafje niet in de poort, omdat je het risico loopt het middelste contactvlak af te breken.

Schuif het wattenstaafje langs de randen van de poort om deze schoon te maken.

Wacht een paar minuten totdat de isopropylalcohol is verdampt, sluit het apparaat dan pas aan op een USB-C-kabel en kijk of de poort weer werkt.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.