AT-LP60X Cam Gear Assembly Replacement

İngilizce

Almanca

Adım 3 çevriliyor

Adım 3

Perform Mechanical Reset

With your right hand, hold the tone arm in the rest so that it does not move.
With your left hand, slowly rotate the platter clockwise until you hear a series of clicks.
After hearing the series of clicks, the cam gear assembly should not rotate while you continue to rotate the platter - if the cam gear is still rotating, press the stop button again and repeat step 3.
Cam gear assembly - white gear visible through holes of the platter.
Allowing the tone arm to move freely during this process can result in the stylus being broken.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.