Ana içeriğe geç

iPhone 15 Pro Maxの背面ガラス交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

İngilizce
Japonca
Adım 4
iPhone 15 Pro Max Back Glass Replacement, Insert an opening pick: adım 0, 2 resimden 1. iPhone 15 Pro Max Back Glass Replacement, Insert an opening pick: adım 0, 2 resimden 2.
Insert an opening pick
  • Use a hair dryer or heat gun to heat the bottom edge of the back glass until it's hot to the touch.

  • Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage.

  • Wait up to a minute for the adhesive to separate and a gap to form between the back glass and the frame.

  • If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you.

  • Insert an opening pick into the gap.

  • Remove the Anti-Clamp using the pull tabs on the suction cups.

  • Skip the next two steps.

ドライヤーヒートガンなどを使い、触ると熱く感じるくらいまで背面ガラスの下辺を温めて下さい。

温めすぎないように気をつけて下さい。バッテリーは高熱に弱いです。

そのまま1分ほど放置して、接着が剥がれて背面ガラスとフレームの間に隙間ができるのを待ちます。

1分経っても隙間ができない場合は、温め直して青いハンドルを4分の1周回して下さい。リバースクランプと時間を使えば必ず隙間はできます。

できた隙間に開口ピックを差し込みます。

吸盤についているタブを使って、リバースクランプを取り外します。

この直後にある2手順は飛ばして下さい。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.