Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 28 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 2 çevriliyor

Adım 2
The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly. Slightly lift the lower case near the vent opening. Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.
  • The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

  • Slightly lift the lower case near the vent opening.

  • Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

  • The location of these three clips is shown in the third picture.

下部ケースは、ゴムで覆われたアルミニウムで構成されています。再組み立て時に組み立てられなくなってしまうので、外す際に下部ケースを曲げすぎないでください

通気口の近くを少し持ち上げます

下部ケースは内部で固定されているので、固定が外れるまで下部ケースと本体の間に指を入れて動かし続けます。

これらの3つのクリップの位置は、3枚目の画像に示されています。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.