Ana içeriğe geç

Desensamblaje del Sony a7iii

İngilizce
İspanyolca
Adım 8
Sony a7iii Disassembly, Remove the Entire Camera Back with Display: adım 0, 2 resimden 1. Sony a7iii Disassembly, Remove the Entire Camera Back with Display: adım 0, 2 resimden 2.
Remove the Entire Camera Back with Display
  • The back cover requires some prying but not a lot. If it's too difficult, check for screws to remove.

  • There is just one ribbon cable connecting the entire back to remove when the back is loose. The connector is a ZIF type that flips up toward the top of the camera to loosen.

La cobertura trasera requiere algo de palanca pero no demasiada. Si está muy dura, busca tornillos restantes para quitar.

Hay solo un cable plano conectando toda la parte posterior, que se debe quitar cuando la parte posterior esté floja. El conector es de tipo ZIF que se voltea hacia arriba de la cámara para aflojar

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.