Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
İtalyanca

Adım 22 çevriliyor

Adım 22
Extract the bus cable with needle nose pliers by lifting the tab and pulling it away. If your computer doesn't power on, then check to make sure this cable is plugged in. Always lift tabs vertically to free cables.
Remove bus cable to Motherboard.
  • Extract the bus cable with needle nose pliers by lifting the tab and pulling it away.

  • If your computer doesn't power on, then check to make sure this cable is plugged in.

  • Always lift tabs vertically to free cables.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.