-
Pull the icemaker toward you.
-
It should drop down as you pull it toward you off the mounting bosses. This should occur after it moves about 2-3cm (3/4-1").
-
Lower and remove the icemaker from the ice room.
-
During reassembly, hold the icemaker so it is level and flush to the top of the ice room.
-
Then push it back into the ice room so that the bosses near the front of the ice room engage the oval slots on the ice maker, and the rear lip of the icemaker engages the rim at the rear of the ice room.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.
Kılavuz Adımlarını Düzenlemek için Klavye Kısayolları:
Ctrl + N
Bir sonraki satır
Ctrl + P
Bir önceki satır
Ctrl + Shift + N
Aşağıya yeni bir satır ekle
Ctrl + Shift + P
Yukarıya yeni bir satır ekle
Ctrl + ]
Mevcut satırı girintili yap
Ctrl + [
Mevcut satır girintisini kaldır
Ctrl + D
Mevcut satırı sil
Shift + ;
Sonraki adıma git.
Shift + H
Önceki adıma git.
Bütün kısayolları göster