AT-LP120-USB Spotlight Replacement

İngilizce

İtalyanca

Önceki adım Sonraki adım

Adım 4 çevriliyor

Adım 4

AT-LP120-USB Spotlight Replacement, Spotlight Leads: adım 0, 3 resimden 1.

AT-LP120-USB Spotlight Replacement, Spotlight Leads: adım 0, 3 resimden 2.

AT-LP120-USB Spotlight Replacement, Spotlight Leads: adım 0, 3 resimden 3.

Spotlight Leads

This step involves using a soldering iron. If you're not comfortable handling one, it's recommended to seek assistance from a qualified technician.
With a soldering iron, carefully heat the connection points where the wires are attached. Once the solder melts, gently remove the wires.
The shorter lead connects to the top pin of the switch near the spotlight, whereas the longer lead gets connected to the 12V pad on the main PCB.
Short Lead
Long Lead

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.