Ana içeriğe geç

Sostituzione batteria centrale elettrica portatile

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

İngilizce
İtalyanca
Adım 2
Portable Power Station Battery Replacement: adım 0, 3 resimden 1. Portable Power Station Battery Replacement: adım 0, 3 resimden 2. Portable Power Station Battery Replacement: adım 0, 3 resimden 3.
  • The battery cover locks the battery in place. Once removed, the battery becomes free to fall out of the power station.

  • Remove the metal battery cover.

  • During reassembly:

  • Hook the short edge of the cover without cutouts into place at the front, near the display.

  • Firmly press down on the opposite edge of the cover until it clips into place.

  • Make sure the battery cover doesn't pinch the battery cables—they should be routed under the cover and angled inward.

La copertura della batteria blocca la batteria in posizione. Una volta rimossa, la batteria è libera e può cadere fuori dalla centrale elettrica portatile.

Rimuovi la copertura metallica della batteria.

Durante il rimontaggio:

Aggancia il lato corto della cover senza intagli al suo posto nella parte anteriore, vicino allo schermo.

Premi saldamente sul lato opposto della copertura finché non si aggancia in posizione.

Accertati che la copertura della batteria non schiacci i cavi della batteria. Dovrebbero essere fatti passate sotto la copertura e angolati verso l'interno.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.