Ana içeriğe geç

ポータブルパワーステーションのバッテリーの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 2
Portable Power Station Battery Replacement: adım 0, 3 resimden 1. Portable Power Station Battery Replacement: adım 0, 3 resimden 2. Portable Power Station Battery Replacement: adım 0, 3 resimden 3.
  • The battery cover locks the battery in place. Once removed, the battery becomes free to fall out of the power station.

  • Remove the metal battery cover.

  • During reassembly:

  • Hook the short edge of the cover without cutouts into place at the front, near the display.

  • Firmly press down on the opposite edge of the cover until it clips into place.

  • Make sure the battery cover doesn't pinch the battery cables—they should be routed under the cover and angled inward.

バッテリーカバーはバッテリーを固定しています。そのためカバーを取り外すと、バッテリーはパワーステーションから自由に外れます。

金属製のバッテリーカバーを取り外します。

再組み立ての際

切り込みの入っていないカバーの短辺側を、ディスプレイ付近の前面の所定の位置に引っ掛けます。

カバーの反対側の端を、クリップが所定の位置にはまるまでしっかりと押し下げます。

バッテリーカバーがバッテリーケーブルを挟まないように注意してください。ーケーブルをカバーの下に通して、内側に角度をつけて装着します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.