Ana içeriğe geç

Rimozione scheda UI centrale elettrica portatile

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

Adım 6 çevriliyor

İngilizce
İtalyanca
Adım 6
Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 1. Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 2. Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 3.
Remove the UI board
  • Long pins on the main board plug into the UI board and hold it in place.

  • With one hand, hold on to the main board.

  • Don't press the board down against your work surface, or you may damage the surface‑mounted components on the board.

  • With your free hand, grip the UI board by its edges and firmly pull it straight away from the main board to disconnect it.

  • Make sure the boards stay perpendicular to each other or the pins might get damaged.

  • During reassembly:

  • When pushing the UI board back into place, make sure the side opposite the sockets goes into its cutout on the main board. Otherwise, it will prevent the UI board from fully seating.

I pin lunghi sulla scheda madre si inseriscono nella scheda UI e la tengono ferma.

Con una mano, tieni ferma la scheda madre.

Non premere la scheda contro la tua superficie di lavoro o potresti danneggiare i componenti montati in superficie sulla scheda.

Con la mano libera, afferra la scheda UI dai suoi bordi e tirala con decisione via dalla scheda madre per scollegarla.

Accertati che le schede restino perpendicolari l'una all'altra o i pin potrebbero danneggiarsi.

Durante il rimontaggio:

Quando spingi la scheda UI di nuovo in posizione, accertati che il lato opposto alle prese entri nel suo incavo nella scheda madre. In caso contrario, la scheda UI non si inserirà completamente.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.