Eşyalarını Tamir Et Topluluk Mağaza

ポータブルパワーステーションのUIボードの取り外し

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

Önceki adım

Adım 6 çevriliyor

Kılavuza Dön
İngilizce
Japonca
Adım 6
Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 1. Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 2. Portable Power Station UI Board Removal, Remove the UI board: adım 0, 3 resimden 3.
Remove the UI board

  • Long pins on the main board plug into the UI board and hold it in place.

  • With one hand, hold on to the main board.

  • Don't press the board down against your work surface, or you may damage the surface‑mounted components on the board.

  • With your free hand, grip the UI board by its edges and firmly pull it straight away from the main board to disconnect it.

  • Make sure the boards stay perpendicular to each other or the pins might get damaged.

  • During reassembly:

  • When pushing the UI board back into place, make sure the side opposite the sockets goes into its cutout on the main board. Otherwise, it will prevent the UI board from fully seating.

UIボードの取り外し

メインボードの長いピンをUIボードに差し込んで固定します。

片手でメインボードを持ちます。

ボードを作業面に押し付けないでください。ボード上の表面実装部品を損傷する恐れがあります。

空いている方の手で、UIボードの端を持ち、メインボードからしっかりと引き離して外します。

ボードが互いに垂直であることを確認してください。

再組み立ての際、

UIボードを元の位置に押し戻す際は、ソケットの反対側がメインボードの切り込みに入るように配置します。そうでないと、UIボードが完全に固定されません。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.