Xbox Series X/S Wireless Controller Joystick Replacement

Adım 8 çevriliyor

İngilizce

Korece

Adım 8

This step shows how to remove solder residue with a solder wick. If the potentiometer feels loose, skip this step.
Apply flux to the solder joint.
Lay a piece of clean solder wick over the solder joint.
Press the tip of your soldering iron over the wick so that the residue melts and transfers onto the wick.
Repeat the process with the remaining two solder joints.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.