Changement joystick manette Xbox Series X/S sans fil

Önceki adım Sonraki adım

Adım 24 çevriliyor

İngilizce

Fransızca

Adım 24

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: adım 0, 3 resimden 1.

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: adım 0, 3 resimden 2.

Xbox Series X/S Wireless Controller Joystick Replacement, Clean the circuit board: adım 0, 3 resimden 3.

Clean the circuit board

Use your soldering iron to heat up a through-hole on the circuit board.
Use a desoldering pump to suck up any solder residue from the through-hole.
To clear out through-holes, heat it from one side and use the desoldering pump to suck through the hole from the other side.
You can also use solder wick instead to remove the residual solder.
Repeat this for all through-holes and both sides of the circuit board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.