Eşyalarını Tamir Et Topluluk Mağaza

Comment changer l'adhésif pour vitre arrière iPhone

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Sonraki adım

Adım 1 çevriliyor

Adım 1
iPhone 16 Pro Max Back Glass Installation, Remove the leftover adhesive: adım 0, 3 resimden 1. iPhone 16 Pro Max Back Glass Installation, Remove the leftover adhesive: adım 0, 3 resimden 2. iPhone 16 Pro Max Back Glass Installation, Remove the leftover adhesive: adım 0, 3 resimden 3.
Remove the leftover adhesive

  • Work around the fragile grounding clips as you're cleaning the frame. If you bend one out of place, gently bend it back with your fingers or tweezers.

  • Use blunt nose tweezers or your fingers to remove large pieces of adhesive from the frame perimeter.

  • Use a spudger to scrape the adhesive residue off of the frame.

  • If the adhesive feels stubborn, apply some heat using a hair dryer or heat gun and try again.

Retirer l'adhésif restant

L'adhésif restant sur votre châssis ne se décolle pas et laisse des résidus. Si l'adhésif semble tenace, appliquez une faible quantité de chaleur à l'aide d'un sèche-cheveux ou d'un pistolet thermique.

Utilisez l’une des extrémités d’une spatule (spudger) pour faire rouler l’adhésif et le détacher du châssis.

Utilisez une pincette arrondie ou vos doigts pour retirer les morceaux d’adhésif détachés.

[title] Remove the leftover adhesive
-[* icon_note] The leftover adhesive on your frame resists peeling and leaves residue. If the adhesive feels stubborn, apply a low amount of heat using a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true].
-[* black] Use either end of a spudger to press and roll the adhesive off the frame.
-[* black] Use [product|IF145-020-4|blunt nose tweezers] or your fingers to remove loose pieces of adhesive.
+[* icon_caution] Work around the fragile grounding clips as you're cleaning the frame. If you bend one out of place, gently bend it back with your fingers or tweezers.
+[* black] Use [product|IF145-020-4|blunt nose tweezers] or your fingers to remove large pieces of adhesive from the frame perimeter.
+[* black] Use a spudger to scrape the adhesive residue off of the frame.
+[* black] If the adhesive feels stubborn, apply some heat using a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true] and try again.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.