Eşyalarını Tamir Et Topluluk Mağaza

Cómo reemplazar el adhesivo del vidrio trasero de tu iPhone

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
İspanyolca
Adım 3
iPhone 16 Pro Max Back Glass Installation, Clean the frame: adım 0, 1 resimden 1.
Clean the frame

  • Wrap a lint-free cloth or a coffee filter over the point of a spudger and apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to it.

  • Wipe in one direction along the perimeter of the frame to clean the adhesive residue.

  • Take your time doing this. A clean frame allows replacement adhesive to lay evenly, ensuring a better bond.

Limpia el marco

Cualquier residuo sobrante comprometerá el sello de tu iPhone. Asegúrate de limpiar bien el marco.

Envuelve un paño de microfibra o sin pelusa sobre la punta de tu spudger y aplica unas gotas de alcohol isopropílico altamente concentrado (más del 90%) al paño.

Limpia en una dirección a lo largo del perímetro del marco para limpiar los residuos de adhesivo.

[title] Clean the frame
-[* icon_caution] Any leftover residue will compromise your iPhone's seal. Be sure to clean the frame thoroughly.
-[* black] Wrap a lint-free or microfiber cloth over the point of your spudger and apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to the cloth.
+[* black] Wrap a lint-free cloth or a coffee filter over the point of a spudger and apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to it.
[* black] Wipe in one direction along the perimeter of the frame to clean the adhesive residue.
+[* icon_note] Take your time doing this. A clean frame allows replacement adhesive to lay evenly, ensuring a better bond.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.