Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.
Adım 2 çevriliyor
-
Use angled tweezers to grip the black pull tab at the bottom right corner of the 5G mmWave antenna.
-
Press the antenna down with your free hand and use your tweezers to pull the stretch‑release adhesive strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the antenna.
-
If the adhesive strip breaks off, try to retrieve it with your tweezers and continue pulling.
-
If you can't retrieve the strip, follow the next two steps for an alternate method. Otherwise, skip the next two steps.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.