Pentax LX Shutter Speed Resistor Cleaning

İngilizce

Japonca

Adım 4 çevriliyor

Adım 4

Remove shutter speed selector assembly

Unsolder two yellow wires.
Remove one #00 4.0 mm screw.
Remove one #00 2.2 mm screw.
Remove one #00 2.5 mm screw.
Remove high speed cam.
Installation Note: Set dial to 'Auto' before installing. After install, unlock the viewfinder indicator and check that it is showing the correct speeds in the viewfinder as the dial is turned.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.