Ana içeriğe geç

索尼 DualSense 手柄后盖更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 26 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce
Çince
Adım 1
Rear Case Separation, Remove the rear case screws: adım 0, 2 resimden 1. Rear Case Separation, Remove the rear case screws: adım 0, 2 resimden 2.
Remove the rear case screws
  • Use a Phillips screwdriver to remove the two 6.4 mm screws securing the bottom corners of the lower case.

使用十字螺丝刀卸下固定下壳底角的两颗 6.4 毫米螺丝。

-[title] Remove the rear case
+[title] Remove the rear case screws
[* red] Use a Phillips screwdriver to remove the two 6.4 mm screws securing the bottom corners of the lower case.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.